Tank Head FAQs

Yes. Describe the shape, material, dimensions and questions you already have. Identify the missing details so they can be discussed.

Include the diameter with ID or OD basis, units, thickness basis and the profile-specific dimensions such as depth, straight flange or radii.

No. Confirm the intended ratio, geometry standard and drawing dimensions. Do not assume that every elliptical description means a 2:1 profile.

No. Use the actual crown, knuckle and flange geometry to confirm what terms such as torispherical, F&D or shallow-dished mean for the project.

No. Hot pressing describes a forming process. Pressure-vessel design conditions and requirements are a separate matter.

Provide the full grade, material specification and product form shown on the drawing. State surface and documentation requirements separately.

Include the required quantity in the enquiry. Quantity conditions need to be considered with the material, geometry and actual supply requirement.

The project drawing, material, quantity, processing and inspection requirements need to be reviewed before timing is addressed in the quotation.

State why it is required, the intended quantity and the acceptance requirements. Availability and terms need to be confirmed for the project.

List the material, dimension and other inspection records required by the project, including their applicable scope and acceptance requirements.

Provide the destination country and any packing, transport or trade-term requirements so they can be addressed in the quotation.

No. An enquiry starts a discussion. The actual specification, commercial offer and order details need separate confirmation.